Elkhart Brass SM-1250E X Stream 2.5 Electric Actuated Fire Nozzle 1250 GPM

  
The Elkhart Brass SM-1250E X-Stream Nozzle features a flow rate range of 300 to 1,250 GPM (1,136 to 4,732 LPM). It is intended for use on deck guns, ladder pipes, and fixed monitor installations. Operating Pressure: Calibrated to operate at a lower pressure of 75 psi (5 bar).

Flow Range (GPM): 300 - 1,250 GPM. Flow Range (LPM): 1,330 - 4,750 LPM. Mechanism: It is an automatic pressure-regulating nozzle, meaning it self-adjusts to maintain a consistent stream and maximum reach even if water supply or pump pressure fluctuates.

Control: The "E" in the model name indicates an electric motor design, allowing the stream pattern (from straight stream to wide fog) to be remotely controlled via a 12V or 24V system. Input Power 12 VDC or 24 VDC. Nozzle Dimensions Ø6 7/8" X 9 5/16" L (SM500E, SM1000E, SM1250E).

Nozzle Dimensions Ø7 15/16" X 10 1/16" L (SM2000E). Operating Temperature Range -40oC to +85oC. Nozzle is normally electrically actuated through Monitor Control System.

It will free wheel at both ends of. Stroke (fog and straight stream). Please note that the nozzle does not have a shut-off function. When monitor is not in use, return it to its designated park position.

We recommend storing in full fog facing. Downward to allow nozzle to drain. However, some operating requirements may override this. The nozzle tip can be adjusted easily by using the override bolt and a 3/4 drive ratchet, by rotating the bolt.

Counter-clockwise for straight stream or clockwise for fog patterns.