THIS IS A GENUINE OEM ELKHART BRASS NOZZLE!! THIS IS NOT A CHEAP AFTERMARKET OR USED PART THAT WILL NOT LAST AND WILL NEED REPLACED!! Ships in generic bulk packaging.
Get the best price ANYWHERE HERE!! Get your genuine high end part for much cheaper here. Don't worry about old used parts breaking, this is brand new. Don't settle for used parts this is brand new. Items must be well packaged and insured.Buyers are responsible to ensure that items are received back to us in the original undamaged condition. Fits: (may fit various models, you are responsible to verify this is the correct part number for your application). The Hydro-Foam nozzle is one of the most efficient and effective tools for AFFF firefighting available today. The nozzles unique design, with built-in educator, allows it to be attached to any existing fixed monitor, portable monitor, or deck gun.
The nozzle can also be used with plain water for cooling exposures or for fire attack. When the need arises for high application rates of AFFF, simply inserting the pick-up hose into your foam supply produces an instant AFFF foam system. In many cases, knock-down of large fires can be achieved while hand lines are being pulled for final extinguishment.
The proportioning rate of these nozzles can be changed easily in the shop or fire station. Remove the foam inlet adapter or nipple, and remove the previously installed foam metering washer. Note: the HF-350 & 350-A, 6% setting uses NO metering washer. The metering washers will be marked 500 or 350 and the percentage they are to be used for: ½%, 1%, or 3%.
Insert new washer into the inlet nipple or adapter, and thread it back into the nozzle body. Loctite #262 should be used to secure adapter/nipple threads. The HF nozzles are factory set with a 3% metering washer. A ½% & 1% washer is also provided.
The HF-350 is factory set for 3% proportioning, for 6% use NO metering washer. Metering washers for ½% and 1% proportioning are provided. If you have chosen to use the optional 3-6% metering valve with your nozzle, DO NOT INSTALL any of these washers. Illustrations on the back of this sheet show installation of the various available foam inlet options.
The quick connect coupling is a convenience option. It allows you to keep the suction hose stored until the need for foam arises. You can then quickly attach the hose and start foam operations. The quarter turn on/off valve allows you to keep the suction hose permanently attached to the foam supply and the instant you need foam you can open the valve. The 1-3% & 3-6% metering valves are ideal for quickly switching between two types of foam. (1- 3% & 3-6% valves only available for HF-350 & 350-A). The item "Elkhart Brass HF-350 Hydro-Foam Nozzle Fire Foam 2.5 FNH Master Stream Suppress" is in sale since Saturday, April 18, 2020. This item is in the category "Business & Industrial\Facility Maintenance & Safety\Fire Protection Equipment\Fire Hoses". The seller is "tadz" and is located in Farmington, Utah. This item can be shipped worldwide.